الموضوع: DreamBox 500HD Tutorials
عرض مشاركة واحدة
  رقم المشاركة : [ 1  ]
قديم 03-24-2010
fa7oom
ADMIN
الصورة الرمزية fa7oom


المشاركات
22,884

+التقييم
32

تاريخ التسجيل
5 - 9 - 09

الاقامة
Jordan

نظام التشغيل

رقم العضوية
5

fa7oom على طريق التميز
غير متواجد
 
افتراضي DreamBox 500HD Tutorials
كود:
DM 500HD firmware update via browser

What you need to update the firmware:
You need a current image. Such an image for the DM 500HD has the extension *. NFI.
It is not possible einzuspielen another image type such as *. IMG!
Do not try it please, it does not work.
You still need a DHCP server on your network, an intact bootloader
You need a browser and a network cable. Connect your Dreambox to your
Switch / hub / router.
To import a new image to the Dreambox, you must have the "2nd stage" Loader
in place and undamaged.

The next steps refer to a network with a DHCP server running.
- Turn off the dreambox, use this switch back in the pits. The
Standby is not enough!
  • (1.) Press the button on the front panel and hold it down.
  • (2.) Turn on the Dreambox via the switch on the back of housing a
  • (3.) your Dreambox now get the next free DHCP IP address from your router.
- Now, open a browser on your PC. (1.) Enter the IP address in the address field of the browser "http://ip/" field. - (2.) Now press the pick "firmware upgrade" of the displayed page in Browser. - On the next page, you can now select the desired image you dubbing in the box like. Please note the file extension *. nfi that dub other images is not possible (NO *. img)! - Click on the selection of the images on the selection of "FLASH!" and wait please completely transferred to the image was flashed. - Turn up the whole box, and then ask then on again. The new operating software should now be recorded and boot





توقيع fa7oom
سيرفر جوردان سات - الشيرنج كما لم تراه من قبل